Upstairs

Well, we can’t really go up stairs at the cabin yet, but this weekend we finished the flooring in the upstairs!  We finished all of the first floor interior walls which allowed us to then install the floor-of-the-sleeping-loft/ceiling-of-the-first-floor.  I had really hoped to start hanging rafters but we had 20 mile/hour winds both Saturday and Sunday.  Besides that, we had to fix a problem with the second story floor.

Early on when we we installing the beams, we discovered that the wood we were using was not all cut the same length.  Ten foot boards are supposed to be 10 feet long, end of story.  We got burned on one of the beams, the hard way.  I hate the thought of having to measure every board I use but it almost seems necessary after we discovered another board-length issue this weekend.  These “shortages” are not obvious until something farther down the line just doesn’t work out.

This is the floor of the sleeping loft

So, we had to rip up some stuff and make it right which slowed our roofing progress.  Our goal this year is to get the roof up to keep the snow out so any screw-ups this late in the year hurt.  Still, we should be ok if we can get clear weekends.

The subfloor laid in the sleeping loft. The extra height of the exterior walls gives us a knee wall for added headroom

So, it’s hard to see the rooms but we have a living room, kitchen and bathroom on the first floor.  The second floor is a sleeping area.  With the floor in place, I think it is a bit more obvious why we made the outer walls 10 feet tall.  The extra 2 feet of height before the roof cuts in should give us a little more room in the sleeping area.

Another view of the subfloor...the view is going to be so cool!

The stairwell into the sleeping loft

Abigail stayed with her great-grandparents this weekend while Isaac, Emily and I worked.  We taught Isaac how to measure precisely and he even ran the chop saw quite a bit.  He understands sixteenths better than a lot of adults I have seen so he did a really great job cutting boards for me at the exact length I needed.  He knows about “leaving the line” and “cutting the line”.  He knows when I say, “cut a board a skinny 77 inches” means I need a sixteenth short of 77 inches.  It surely saved my knees a lot of up and down the ladder.

Learning to measure a board

Measuring solo!

Isaac using the chop saw solo

We probably won’t get much done beyond weathering in the place, but I do plan to close in the area under the building.  I am considering doing a cord-wood wall structure around the base but I am not yet sure.  Anyone have any opinions?   Luckily, I think it won’t hurt if we don’t get to it until Spring.  In the meantime, I will probably work on getting stairs in place so I can actually go up stairs to get to the upstairs part of our deluxe shed!

See all of the progress on the cabin